Monte Carlo Fan Company AC-552 Installation Manual download pdf (Page 3)

3/8/2013

OFF

Preparation

Warning: Before starting assembly of this product, please disconnect

power to area and familiarize yourself with the safety information

provided on page 2.

Determine mounting method to use.

A - Downrod Mount

B - Angle Mount

Important: If using the angle mount, check

to make sure the ceiling angle is not steeper

than 18º.

Important: If using the angle mount, make sure open end of mounting

bracket is installed facing the higher point of the ceiling.

C - Flushmount

Note: Flushmount is not available with vaulted ceiling.

Installation Instruction

Before you begin installing the fan, Switch power off at Service panel

and lock service disconnecting means to prevent power from being

switched on accidentally. When the service disconnecting means cannot

be locked, securely fasten a warning device, such as a tag, to the

service panel. (Fig. 1)

Before installing this fan make sure the outlet box is properly installed to

the house structure. To reduce the risk of ﬁre, electric shock, or

personal injury, mount to outlet box or supporting system acceptable

for fan support (Mounting must support at least 35 lbs). (Fig. 2)

Use metal outlet box suitable for fan support and use only the screws

(and may be with ﬂat washers and lock washers) provided with the outlet

box (must support 35 lbs). Before attaching fan to outlet box, ensure

the outlet box is securely fastened by at least two points to a structural

ceiling member (a loose box will cause the fan to wobble). Remove the

two outlet box screws provided with the box, aligning the holes of the

mounting bracket with the holes of the outlet box. Reinstall the 2 outlet

box screws securely. (Fig. 2-1)

Fig. 1

Fig. 2 Fig. 2-1

Mounting

bracket

1 2 3 4 5 6 7 8 9 10

No comments

Monte Carlo Fan Company AC-552 Installation Manual Page 3