Monte Carlo Fan Company Crystoria Installation Manual download pdf (Page 4)

© 2011 Monte Carlo Fan Company

2/11/2012

4

Remove any shipping stabilizers if

present. Attach blade assembly to

motor using the motor screws and

washers provided. Tighten screws

securely.

13

Make wire connections to power source using

wire nuts provided. Make sure that no filiments

are outside of the wirenut. After making the

wire connections, the wires should be spread

apart with the grounded conductor and the

equipment-grounding conductor on one side of

the outlet box and ungrounded conductor on

the other side of the outlet bo x.

10

For pullchain controls, follow diagram above.

Make sure that all exposed wiring is secured

inside wire nuts. Note: Wires from house ma y

vary in color and ma y not include ground wire.

After wiring is conplete, gently push wires into

junction box with wire nuts pointing upw ard.

Refer to point 3 of safet y tips.

11

House

Fan

Black

White

Green

Black

White

Green(downrod)

Green(Bracket)

Blue

Remove 3 screws from the switch

housing plate and save to re-install

into the switch housing.

14

Loosen one and remove one pre-

assembled screw from mounting

bracket. Save screw. Lift canopy up,

aligning its keyhole slot with the pre-

assembled screw on mounting

bracket and twist clockwise to lock in

place. Re-install the removed screw

and tighten all screws securely.

12

Install the switch housing using the

3 screws previously removed.

Setting the reverse switch in the

left hand side will result in

downward airflow and setting the

switch in the right hand side will

result in upward airflow.

15

Reverse switch

1 2 3 4 5 6

Comments to this Manuals

No comments